Fix That Fencing! The DIY Guide

Wrought iron gates and fences are built to last for a decade or so, and with proper maintenance, they often last past this time limit effortlessly. However, if you are not careful, you might let rust work its way into your fencing, and this can seriously weaken it. If you have discovered a rust build-up on your wrought iron fencing, do not lose hope, however – there is still hope for repair. Below is a quick guide on how to restore your wrought iron fencing with a little effort:

  • Start by scraping away old paint and rust – the first step in the rehabilitation process is getting rid of flaky and chipped paint, as well as that new layers of rust. For the paint that has started to fall off, use a scraper and remove it completely; for the rust, you can sandblast fences, but you also have the alternative of using a drill with a sanding wheel. Regardless of which method you employ, make sure to work your way to all the joints and parts, and in some cases of deep rust, do not hesitate to go all the way down to the metal.
  • Do the preparations – once the rust and paint are out of the way with sandblasting Narre warren , take a medium-sized grit to smoothen up the fence, and then proceed to buff it up with steel wool (make sure to go in a circular motion for the best results). Conclude with washing the fence with water to remove the dust that remains, and you are done with the preparations.
  • Neutralize the remaining rust – you might not see any more rust in your fence, but in truth, some invisible rust may remain, and it will continue to act on your fence and weaken it unless you neutralize it. Buy a rust neutralizer and apply the solution with a wire brush, scrubbing as you move along the fence. Once the solution has dried, wash the fence once again – this time with water and soap.
  • Painting and prime – once the fence has dried up, you can finally apply the prime. Make sure to buy a rust-resistant variety, and apply a thick layer of it. Once this dries, follow up with two thick layers of similarly rust-repelling paint varieties. Make sure to apply it evenly to the entire fence, and always wait until each coat dries completely before reapplying.
  • Maintain – whilst you have restored your fencing, the job is not yet over: this time, you need to properly commit yourself to maintenance! Wash your fence at least every six months, and regularly lubricate it. If you chance upon any rusting or scratches, sand and buff the area, and finish with an application of rust neutralizer once again. For more information, please click here.sandblasting-coating